Technical specifications
Specifications: 1 '4', DN25 - DN100
Connection mode: welding, clamp, screw thread
Material: 304/316 l
Seal: standard EPDM and silicone, fluorine rubber can be used
Work style: automatically
Surface treatment: fine cars or polishing Ra 0.8 microns or less
Temperature range: - 10 ℃ to + 95 ℃
The maximum product pressure: 10 bar
Minimum pressure of products: vacuum
Jump pressure: 0.1 bar - 8 bar is optional
Operating principle
Static valve is normally closed
Approved by adjusting screw rotation to another
When pressure exceeds verified the pipeline valve off and let the fluid drain
Site remain open during the process of cleaning, you can turn adjusting screw down, will be the main shaft lifting, cleaning cleaning fluid can flow through the valve cavity
